6D ATR-2 Fusion Tri-Composite Moto Helmet
Product Details
- Type Helmets
- Vendor 6D
- SKU 6D-12-2946
- Shipping Weight 1350.0 g
Now Comes with draw string bag and updated visor screws. Discover the pinnacle of motorcycle helmet technology with the 6D ATR-2. This helmet surpasses all others in terms of innovation and performance. Equipped with an advanced ODS system and the unique ability to be rebuilt after most impacts, the ATR-2 stands out from the crowd. Engineered to deliver the most effective energy management solution available, it excels in mitigating impacts across a wide range of demands. Experience unmatched protection and progressive design with the 6D ATR-2.
- Rebuildable Omni-Directional Suspension™ (ODS)
- Durable tri-composite shell
- Air-Gap™ ventilation system
- Removable, washable, dri-lex® antibacterial comfort liner
- Emergency release cheek pads – removable, washable, dri-lex® antibacterial fabric
- Shear-away visor screws
- Roost guard – provides additional face protection
- Cervical spine relief – rear lower shell incorporates compliant zone at the cervical spine location
- Clavicle cut-away – provides increased clavicle clearance
- Sternum pad – provides added protection to the chin, jaw and sternum
- Light weight with improved center of gravity
Rebuildable ODS system:
- Improved ODS design
- Replaceable inner EPS liner
- Multi-impact EPP outer liner incorporates isolation damping towers
- Rotational energy management disks reduce angular acceleration
- Superior low, mid, and high velocity impact mitigation
- Rebuild/crash replacement program
- Rebuildable Omni-Directional Suspension™ (ODS)
- Tri-composite shell – a proprietary woven blend of advanced aerospace carbon fiber, composite fiberglass, and Aramid
- Air-Gap™ ventilation – 9 intake ports, and 6 exhaust ports
- Titanium d-rings
- +/- 1465 grams size M/L
- Exceeds DOT, ECE 22-06, ACU and ASTM standards
- 3-year limited warranty
KEY FEATURES
ONLY 6D HAS ODS™
6D’s Omni-Directional Suspension™ technology is an active, in-helmet suspension and energy management system that is only found in 6D Helmets.
REBUILDABLE
The ATR-2 is revolutionizing the world of head protection by introducing a groundbreaking concept: rebuildability. Unlike traditional helmets that are typically discarded after a significant impact, the ATR-2 is designed to be rebuilt and reused.
RESULTS THAT SPEAK FOR THEMSELVES
LOW-THRESHOLD ENERGY
Most helmet strikes in real-world scenarios are considered low-threshold energy impacts. These impacts fall below the pass/fail thresholds for certification but are still significant enough to result in concussion or more severe injuries.
ANGULAR ACCELERATION
A root cause to brain injury and concussion. Angular acceleration is generated from angled impacts to the helmet’s surface resulting in shearing, tearing and bruising of the soft tissues within the brain.
HIGH VELOCITY IMPACTS
The riskiest of all crash impacts with the greatest potential for severe injury. The helmet must work to its maximum capacity to ensure the highest level of protection.
ODS™ TECHNICAL FEATURES
MULTI-IMPACT OUTER EPP LINER
The multi-impact EPP outer liner is strategically positioned against the helmet shell's inner surface. It is an exceptional energy absorption material designed with EPP "Damping Towers" to assist in progressive loading of the ODS™ system during impacts. This capability, along with the EPP's multi-impact feature, is key in allowing the ATR-2 to be rebuilt.
DETERMINING CORRECT HELMET SIZE
Ensure a Snug and Secure Fit: Your helmet should provide a secure fit around your entire head circumference. Cheek pads should offer firm support against your cheekbones, minimizing lateral movement. Our helmets offer various shell options, cheek pads, and liners for a personalized fit and exceptional comfort. Refer to our simple guide below to get started. For any inquiries, please reach out to us through our online contact form.
- Measure your head circumference: Use a soft tape measure to measure horizontally around your head, approximately one inch above your eyebrows and half an inch above each ear. This will provide your largest reference measurement for sizing.
- Consult the size chart: Cross-check your head measurement with our sizing chart to determine your correct helmet size.
- Select the closest match: Choose the helmet size that closely corresponds to your head measurement. If your head size falls between two sizes, try the smaller one first. Often, helmet pads and liners can be adjusted for a customized fit.
Checking for proper fit
Ensure a Proper Fit: To determine if you have selected the correct helmet size, follow these steps:
- Position the helmet correctly: Ensure your head is fully seated inside the helmet, making contact with the comfort liner on the crown of your head and around the entire circumference. The cheek pads should provide a firm fit against your cheekbone area.
- Test helmet movement: With the chinstrap securely fastened, grip the helmet firmly with both hands. Without moving your head, attempt to move the helmet up and down and from side to side. You should feel the skin of your head and face being pulled over your skull as you try to move the helmet. If the helmet easily moves without this sensation, it is too big and a smaller size is needed.
- Check rotational stability: Try rotating the helmet forward around your ears. It should not be possible to remove the helmet in this manner if the chinstraps are properly fastened.
If you cannot achieve the described fit and adjustments, DO NOT USE THE HELMET as it may result in serious injury or death. Replace the helmet with the correct size for optimal safety.
